Skip to content
Parsha Pages Youth

Parsha Math: The Frame of the Mishkan

  • Tetzaveh
  • 5784
  • English
View printout

The frame of the Mishkan will be fashioned with beams of shittim wood. Each beam is placed vertically into two silver sockets called adonim. Through two rings attached to each beam, one higher, one lower, and a hole bore through each beam, will be placed gold-plated poles that hold together the frame.

Each beam (קרש) was 1 ½ amah wide and 10 amos high and 1 amah thick. Along the West wall were 8 beams, the North & South walls were made of 20 each. The East side had no solid wall but curtains hung on five posts including an entrance.

The verse (Shmos 26:28) says that the middle crossbar went inside the “boards” from one end to the other. Our Rabbis taught us that a miracle occurred and one straight crossbar was entered into the initial hole, went through the 20 beams, and then turned 90° at each of the two corners to connect all three walls. And upon removal, the beam returned to being a straight long pole.

Questions:

  1. How many beams (קרשים) were used to make the three solid walls of the Mishkah?
  2. How long was this single middle crossbar that went from one end to the other end?

More in this printout

View the whole printout